Ways to Determine Your Bath Size
You are here: Home » News » Ways to Determine Your Bath Size

Ways to Determine Your Bath Size


Bathroom designs vary widely. There is also a wide range of bathroom essentials that you can put into your bathroom. Just make sure that when you design or decorate your bathroom, you put function and comfort first and foremost. But if you do not have any idea as to how to begin on a bathroom design project, you must follow some very useful instructions.


It is quite unfortunate that bathtubs often end up as later additions to the over all design of a home. If you factor in how important bathing and other uses of a tub then you should place bathtubs as one of the important parts of your home's design above even a normal shower. In fact, there are numerous options when picking a bathtub for your bathroom. Part of the considerations regarding bathtub sizes includes the available space you have in your bathroom or shower room. Knowing the standard size will roughly give you an idea of what size of bathtub you want to buy as to the space you have available.


One of the most important considerations when it comes to bathroom design is the size. Experts advice will tell you that the standard dimension of a bathroom varies. The size depends on what you are thinking about putting in there. For a full bathroom, which includes a bathtub, such as acrylic bathtub or cast iron bathtub, a shower tray, a wash basin, and a toilet, you will need a bigger space definitely. The standard dimension of a bathroom of such kind is 5 feet by 8 feet. In case you have a smaller space for a bathroom, you may omit the acrylic bathtub or cast iron htub and just make do with a corner shower plus a toilet and sink. For that, you will need a 6 feet by 6 feet floor area. While for a half bathroom, which does not have a bathing area, a 3 feet by 6 feet dimension is good enough. In there, you could fit in a powder room plus the standard toilet and sink combo. The smallest dimension of a bathroom is at least 36 inches by 66 inches. This should fit in a toilet.


Your standard bathtub will basically have its dimensions as 60" by 30" for its rough opening. However, your standard bathtub size, like shaped tub will has a smaller dimensioned bathing well, which consists of its insides that measures 45" by 22" at the very bottom. Not only that, the top of the bathing well will measure 55" by 24". It appears that these are the general bathtub sizes for both cast iron bathtubs and fiberglass bathtubs.


Related News:
  • How to Clean Luxurious Bathtub?
  • Different Types of Wash-basin
  • Some Suggestions about Shower Tray Installation
  • How to Recycle Old Cast Iron Bathtub?
  • How to Refurbish Cast Iron Bathtub?
  • How to Remove Acrylic Bathtub or Cast Iron Bathtub?
  • How to Clean and Maintain Acrylic Bathtubs?
  • How to Maintain Acrylic Bathtub?
  • How to Fix a Cast Iron Bathtub?
  • How to Clean Stains from Cast Iron Bathtub?

    Related Products: Cast Iron Bathtub Steel Enamel Bathtub Shower Tray Acrylic Bathtub Luxurious Bathtub Wash-basin
  • Chinese German Spanish French Italian Portuguese Japanese Korean Arabic Russian